Opens in a new tab

Medical Biller Productivity Is a Setup Question Before It’s a People Question

Is your billing team falling behind or making errors? Read medical biller productivity from the work and the setup, never the person.
Updated October 2026

It’s Friday afternoon, and the billing backlog, the pile of work waiting on your billers, is bigger than it was on Monday. Your billing lead says the team is slammed, and you believe it. What you can’t tell is what slammed means: too few people, the wrong work, or a setup that keeps making new work.

A practice we worked with was sure it had the opposite problem. The owner thought the billing team was too big and planned to cut a seat. A week of counting showed the team finishing less than arrived, and part of every day went to claims bouncing back for one setup error. Fixing the setup gave the team its days back.

So medical biller productivity is a setup question first. Look at the work and the system around the team before you look at the people. Billing is one part of the whole money path, stop by stop, and the team can only work what reaches it.

How do I know if my billing team is keeping up?

Watch three numbers every week, each one against the team’s own recent weeks. If all three hold steady, the team is keeping up, whatever the mood in the room.

  1. Work arriving versus work finished, by type. Count each type on its own: new visits to bill, denials (an insurer’s refusals to pay), and payments to post. One type can pile up while the total looks flat.
  2. The age of the oldest item in each queue. A queue is a work list in your billing system. When the oldest item keeps getting older, the team is working from the top of the pile.
  3. Days of payments received and not yet posted, by insurer. Posting means recording the insurer’s payment against the visit it paid. It’s the posting number from the weekly list for the whole path, and a payment posting backlog has the team chasing money already in your bank.

If these numbers climb, read the rest of this page before you post a job opening.

Why “how are we doing?” never settles it

Asking gets you an answer shaped by whoever answers, sure on a good day and grim on a bad one. Looking works better, as long as every finding carries its evidence. A number handed down with no “here’s how we know” gets argued over and never acted on.

So bring the list behind the number and ask the team to poke holes in it. To test your view today, ask which insurer went quiet last month, and time the answer.

Busy isn’t the same as caught up

A team can work hard all week and still fall behind, because effort on the wrong work doesn’t move money. Four patterns hide inside a busy week.

Order comes first. Teams start with denials because they’re visible. Meanwhile, claims that never got sent drift toward the filing deadline, the insurer’s cut-off for accepting a claim. Ranking the billing queue lays out the order by cash.

Then there’s the side list. A stretched biller parks stuck claims on a personal list to research later, and those claims drop out of every total. One person ends up carrying a pile nobody else can see.

“Worked” can also mean nothing happened. A claim that paid on its own gets counted as worked, even though nobody touched it. Real work leaves a recorded action, like a note, a re-send, or an appeal.

Last is the write-off, which closes a balance as money you won’t collect. If write-offs outnumber re-sends and appeals, the queue empties and the bank balance doesn’t move.

When the same error keeps coming back, check the setup

A mistake that repeats every week is a missing check, and talking to the biller who made it won’t stop the next one. Pick last month’s most common denial reason and ask what check runs before that kind of claim leaves. If nobody can name one, the fix is a setup change. The piece on medical billing errors shows how to put a do-not next to each do.

Then look at denial tracking, the place in your billing system to flag a denial and log each follow-up step. If last month shows almost nothing logged, there’s no record of work to measure yet, so turn it on before anyone talks about speed.

Read medical biller productivity from your own counts

You can’t size a billing team from somebody else’s standard, because their insurers, visit types, and setup aren’t yours. A claims-per-day figure from a vendor’s website assumes a mix of work you may not have.

For one week, ask each biller to log what they worked, by type, and how each item ended. Then keep counting work arriving and finished for two weeks. That sets your standard: the pace at which the oldest item in each queue stops getting older.

The log also answers the staffing question. If the days are full of the right work and every pile still grows, you’re short on hands. If one type grows, or the log shows the same fix over and over, look at what creates that work first.

Building an in-house billing team covers the five jobs a team has to fill. For each one, make sure someone has the time and the access to act this week, because no report posts a payment.

What AdvancedMD can show you

If your practice runs on AdvancedMD, the billing and scheduling software, start with the reports it already includes. AdvancedMD’s website lists more than 150 standard and nearly 500 configurable financial reports in its Report Center. Its website lists productivity among the report topics, without saying whether any report breaks work down by person. So before you plan around a view by person, ask whether a report shows work by user, like charges entered or payments posted. The AdvancedMD reporting page covers questions that cross into payroll or the bank.

When one person holds the keys

A team can be fully staffed and still stop cold when one person is out. Check the three jobs that tend to sit in one head.

  1. Paper claims. Name who can print and mail claims to the insurers that still take paper. If it’s one name, that channel stops on their week off.
  2. The posting login. At some practices, electronic payment reports post only after one person opens them under their own login. Then that person’s days off are posting outages.
  3. Which insurer goes where. List each insurer with its route, like the clearinghouse (the middleman that carries claims to insurers) or a website, plus its ID.

The piece on what to do when a key biller quits has the full list for the day someone gives notice.

Nobody owns the whole path

The billing team owns the claims, the front desk owns the schedule, and the clinicians own the notes. Nobody owns the distance between them, so money stops in the hand-offs. Put a name next to each step from booking to bank, and the blanks show where money waits.

Then give every task a who, a by-when, and what finished looks like, or it drifts. When the task was done but the money never came covers why done has to mean the money arrived.

Real situations, and what the setup was hiding

The side list one biller carried

A stretched biller kept a personal list of stuck claims to research later. The totals looked clean, so the team looked caught up. The pile surfaced only when someone asked each biller what they kept outside the system. The fix was a shared place for stuck claims and time to work them.

Posting that paused whenever one person was out

Payment reports posted on their own, but only after one person opened them. Every day that person was out, posting stopped and open balances grew. The team looked behind on follow-up while it chased payments already in the bank. A second person with access ended it.

Two people carrying a team

A team that looked fully staffed had a backlog that rose and fell with two people’s calendars. A one-week log showed the rest of the team working claims a setup error kept sending back. The setup got fixed first, and then the work got split again.

What this means for you

You can read medical biller productivity at your own practice this week without asking anyone how it’s going. On Monday, ask each biller to log what they work and how each item ends, and pull the three numbers. On Friday, put the logs next to the numbers.

A growing pile with the same fix repeated in the log is a setup problem. A growing pile with full days of the right work is a hands problem.

When you don’t need this

If the three numbers already reach you every week and hold steady, your team is keeping up. Keep watching them and skip the rest.

If an outside company does your billing, sizing its team is its job. You still watch the three numbers.

And if you’re in your first month of billing in house, the counts will jump while people learn. Read the first 30 days of in-house billing and measure after that.

Questions practice owners ask

What’s a normal number of claims per day for a medical biller?

There’s no national standard, and the only published count is a small DecisionHealth survey from about 2016. Your insurers and visit types decide how long each claim takes, so set your own. Count two weeks of finished work per biller next to the age of the oldest item in each queue (a work list in your billing system). The pace that keeps that item from aging is your standard.

Is billers per provider a good way to size a billing team?

It’s a rough start and nothing more. Clinicians see different volumes, and one insurer can create far more work per claim than another. Size the team from the work arriving each week, by type. Then check it against the age of the oldest item in each queue.

What’s a normal error rate for a medical biller?

There’s no published standard for biller error rates, so use the closest one: claims denied on first submission. MGMA’s July 2026 data puts that at 7 to 8% for the typical practice, with under 5% as the target. Count two weeks of claims stopped or denied for a reason inside your control, by cause. When one cause climbs, check the setup before you look at the person.

Should I track claim denials by biller?

Yes, but only after grouping denials by cause, and never as a ranking. A denial is an insurer’s refusal to pay. Look by person to find who needs help or whose setup is broken, like a biller whose insurers all share one bad setting. A leaderboard teaches people to hide hard claims, and the hard claims are where the money is.

Is a growing billing backlog a sign we need more staff?

Not on its own. Compare work arriving against work finished each week, by type: new visits to bill, denials, and payments to post. If one type is growing, find what creates it, because the same fix showing up over and over is a setup problem. If every type grows and the days are full of the right work, you’re short on hands.

What should I ask my billers to log for one week?

Ask for what they worked, by type, and how each item ended: paid, re-sent, appealed, written off, or still waiting. Add any list they keep outside the system and anything that blocked them. Say up front that it’s about the work, and share what you find with them.

How do I raise a billing problem with my team without it sounding like blame?

Bring the evidence with the question. Show the list behind the number, say how you got it, and ask the team to poke holes in it. Then ask what check would have stopped the problem. The people closest to the work tend to know the fix already, and asking this way keeps the talk on the setup.

Grab 30 minutes with us. Prep nothing. You will see whether your billing team is short on hands or short on setup, from last month’s own work.

PracticePath is not affiliated with, endorsed by, or sponsored by AdvancedMD. AdvancedMD is a trademark of AdvancedMD, Inc. All references are for descriptive purposes only.

How we write these: every piece starts from something we saw in a real practice's money. Names and details are changed, and numbers are rounded, so no practice can be identified. The pattern stays real. We write for practice owners, whether the billing is in-house or outsourced, for the private equity groups that buy and grow practices, and for practices that want more from the software they already pay for.

Read next